planet carrier การใช้

• The output shaft was machined onto the rear unit and reverse unit planet carriers.
• The rear band holds the planet carrier.
• The planet carrier of this gearset was splined to the planet carrier of the reverse unit.
• The planet carrier of this gearset was splined to the planet carrier of the reverse unit.
• It uses the planet carrier as the input with the sun gear as the output, and the annulus normally locked.
• If the ring gear is held stationary and the sun gear is used as the input, the planet carrier will be the output.
• A series of ball detents act on the annulus to lock it, allowing power to be transmitted from the planet carrier to the sun gear.
• The Volvo version kept the same package size as the J-type but with the updated 18 element freewheel and stronger splines through the planet carrier.
• Since the rear unit ring gear with its attached reverse unit sun gear and the reverse unit ring gear were both locked to the transmission case, the planet carriers and driveshaft could not turn.
• Because the rear unit band was not applied for reverse, the rear unit and reverse unit compounded causing the combined planet carriers to rotate opposite to the input torque and at a further reduced speed.
• Production of the U660E and U660F commenced in January 2006, Toyota's first 6-speed automatic transaxles for front-wheel-drive vehicles; Transaxles feature a compact gear train that achieves six speeds using a single axis to produce a high torque of 400 Nm, and are as low cost, compact, and light as 4-speed automatic transaxles The transaxle is a Ravigneaux planetary gear set ( with long and short pinion gears in the same planet carrier ).